15 M / Min Working Speed k Span Roll Forming Machine With Free Accessories
Main Specification
Size: 9300mm × 2250mm × 2500mm
Total Weight: about 13tons
Main Motor Power: 17.0KW forming power is 7.5kw ; bending power is 3.0kw; cutting power is 3.0kw
Working Speed: Straight sheet: 15m/min
Arch sheet: 13m/min
Sewing: 6m/min
Material of rollers: 45# steel, quenched HRC 58-62
Material of roller shafts: 45# steel, adjusted
Material of cutting blade: Cr12 steel (Taiwan Airline Technique)
PLC Type: Germany Siemens
Step of rollers: 13 steps
Feeding Width: 914mm
Effective Width: 610mm
The depth of the groove: 203mm
Thickness of the coil: 0.8-1.5mm
Operating factor of the panel: 66%
Proper span:less than 36m
We provide you some accessories for free, with which you can begin to do projects immediately.
Technical parameter
I Description of the HF-MIC 240 machine
This MIC-240 machine is developed by ourselves with technology similar to ABM MIC-240 forming machine. It is comprised of mechanical expansion decoiler, straight panel forming unit, curving panel forming unit, hydraulic mould cutting device or electric mould cutting device, control system(PLC) or manual controller, out put shelf for straight sheet and curve panel,decoiler. All parts are installed on a mobile chassiss. So it is suitable for site operating.
II Features
1. All the rollers are forged from the high quality structural steel and are processed intensely. The surfaces of the rollers are plated with hard chromium. the rollers have a high hardness and long operating life.
2. The power set to automatically transport the colored steel sheet is equipped in the forming press section, which can press the colored steel sheet with the thickness of 0.8~1.5mm. It is not needed to frequently adjust the clearance between the pressing rolls when pressing the sheet with different thickness, which can make the sheet come out from machine normally without scuffing of the coating film of the sheet.
3. The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument. The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet, which makes the operation simple and guarantees the quality and the dimensional precision.
4. The hoisting tool is light and handy (The weight of hoisting tool of the United States is 30KG. And the weight of hoisting tool of our company is 2KG). It is convenient to install and uninstall. It hoisting speed is very fast.
The joining type of the roof is self-lock, which makes it easy to install and safe with excellent water proof and storm resistance. The curving roof can directly be produced on worksite, effectively lowering the cost. The product is widely used on large-scale and mid-scale industrial construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre and so on.
Product Tags:
|
|
15M/Min Steel Stud And Track Roll Forming Machines Images
|
